Narrow domino two-burner gas cooktop
Free CAD block from the Ranges and cooktops library (144 blocks), drawn 1:1.
About this block
Narrow domino two-burner gas cooktop, drawn in plan, front and side elevation, all three projected from its 3D model so they match to the millimeter. It measures 11½" wide, 20½" deep and 3" high (30 cm × 52 cm × 7.6 cm), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling.
It also comes as a 3D model built from these drawings.
From the Ranges and cooktops library: 144 blocks drawn to one standard, each one available on its own.
In practice
Where it goes
Made for the modular cooktop line-up: a 12 in (30 cm) domino module that sits in a row with a griddle, a wok burner or an induction pair. Use it on apartment and model-home kitchen plans, island layouts and ½ in = 1 ft (1:20) counter details where each module is cut into the countertop separately. Its depth suits an island as well as a wall run.
Clearances to leave
Each domino needs a 12 in (30 cm) cut-out plus a few centimeters of countertop between modules, so a run of three takes about 39 in (100 cm). Keep 24 in (60 cm) of landing counter at the end of the row, the hood 24–30 in (61–76 cm) above, and 48–60 in (122–152 cm) of aisle if it sits in an island.
Pairs with
Line it up with the Square four-zone cooktop with corner control panel or the Four-zone cooktop with ringed zone and corner controls to make a mixed gas-and-induction strip, all set into a dark quartz island.
Common questions
What are the dimensions of this block?
It measures 11½" | 30 cm wide by 20½" | 52 cm deep. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.
Is there a 3D model of this block?
Yes. A 3D model built from this block's drawings, 11½" wide, 20½" deep and 3" high, is free to download in STEP, DXF 3D, OBJ, GLB, 3MF and STL.
File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.
Details
Collections
Drawing at scale3 views
Drawn 1:1. Scale bar for reference.
3D model
Built at real size from the plan drawing, at its real thickness: the top in pressed steel or black glass, each burner with its crown and cap under cast-iron grates or supports, electric plates or zones where the plan has them, and the knobs. Drag to orbit, underneath too; scroll or pinch to zoom.
Dimensions and sizes
Width 11½" | 30 cm, depth 20½" | 52 cm, footprint 1.7 ft², height 3" | 7.6 cm.
Explore at scale
How big is it?
About 1.7× the height of an A4 sheet, a size that suits detail sheets at 1:5 or 1:10.
On your sheet
At 1" = 1'-0" the drawing prints 0.98 in × 1.70 in on Letter.
In the room
Plan at real sizeAll 3 checks pass
Galley kitchen layout
Built around the narrow domino two-burner gas cooktop, the block you are viewing.
Checks
- Aisle in front of the cooktop4' 3"Minimum 3' 3", recommended 3' 6"
- Work aisle between countertops4' 1"Minimum 3' 6", recommended 4' 0"
- Door swing to the nearest fixture (door moved to fit)4"Minimum 2", recommended 4"
Design notes
- Work aisle 3' 6" for one cook, 4' 0" for two (42 and 48 in).
- Keep sink, cooktop and fridge within a few steps: each leg of the work triangle 3' 11" to 8' 10".
- Leave 15½" of landing countertop beside the cooktop and 23½" beside the sink.
The kit, 3 blocks