Four-zone cooktop with ringed zone and corner controls
Free CAD block from the Ranges and cooktops library (144 blocks), drawn 1:1.
About this block
Four-zone cooktop with ringed zone and corner controls, drawn in plan, front and side elevation, all three projected from its 3D model so they match to the millimeter. It measures 23" wide, 19½" deep and 3" high (58 cm × 50 cm × 7.3 cm), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling.
It also comes as a 3D model built from these drawings.
From the Ranges and cooktops library: 144 blocks drawn to one standard, each one available on its own.
In practice
Where it goes
An induction-style cooktop for apartments, co-living kitchens and new-construction houses, with one ringed zone marking a dual-ring or flexible cooking area. The corner controls keep the front edge clean. Draw it on floor plans at ¼ in = 1 ft (1:50) and in the enlarged kitchen plan at ½ in = 1 ft (1:20), where the ring distinguishes it from the plain four-zone version.
Clearances to leave
Its 23 in (58 cm) width and 19½ in (50 cm) depth give a 4 in (10 cm) margin behind it on a 24 in (60 cm) countertop. Keep the corner controls on the side with 24 in (60 cm) of open counter, allow 42–48 in (107–122 cm) of aisle, and set the hood 24–30 in (61–76 cm) above the glass.
Pairs with
Pair it with the Square four-zone cooktop with corner control panel in a two-cooktop island and the Dishwasher with grooved front panel under the sink run, with the countertop in white sintered stone.
Common questions
What are the dimensions of this block?
It measures 23" | 58 cm wide by 19½" | 50 cm deep. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.
Is there a 3D model of this block?
Yes. A 3D model built from this block's drawings, 23" wide, 19½" deep and 3" high, is free to download in STEP, DXF 3D, OBJ, GLB, 3MF and STL. It is a closed part, so it also prints at 1:50 or 1:100 for a scale model.
File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.
Details
Collections
Drawing at scale3 views
Drawn 1:1. Scale bar for reference.
3D model
Built at real size from the plan drawing, at its real thickness: the top in pressed steel or black glass, each burner with its crown and cap under cast-iron grates or supports, electric plates or zones where the plan has them, and the knobs. Drag to orbit, underneath too; scroll or pinch to zoom.
Dimensions and sizes
Width 23" | 58 cm, depth 19½" | 50 cm, footprint 3.1 ft², height 3" | 7.3 cm.
Explore at scale
How big is it?
About 1.7× the height of an A4 sheet, a size that suits detail sheets at 1:5 or 1:10.
On your sheet
At 1" = 1'-0" the drawing prints 1.90 in × 1.64 in on Letter.
In the room
Plan at real sizeAll 3 checks pass
Galley kitchen layout
Built around the four-zone cooktop with ringed zone and corner controls, the block you are viewing.
Checks
- Aisle in front of the cooktop4' 4"Minimum 3' 3", recommended 3' 6"
- Work aisle between countertops4' 1"Minimum 3' 6", recommended 4' 0"
- Door swing to the nearest fixture (door moved to fit)4"Minimum 2", recommended 4"
Design notes
- Work aisle 3' 6" for one cook, 4' 0" for two (42 and 48 in).
- Keep sink, cooktop and fridge within a few steps: each leg of the work triangle 3' 11" to 8' 10".
- Leave 15½" of landing countertop beside the cooktop and 23½" beside the sink.
The kit, 3 blocks