Compact double-bowl sink with equal bowls
Free CAD block from the Kitchen sinks library (155 blocks), drawn 1:1.
About this block
Compact double-bowl sink with equal bowls, drawn in plan, front and side elevation, all three projected from its 3D model so they match to the millimeter. It measures 2' 2" wide, 17" deep and 10½" high (65 cm × 44 cm × 27 cm), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling.
It also comes as a 3D model built from these drawings.
From the Kitchen sinks library: 155 blocks drawn to one standard, each one available on its own.
In practice
Where it goes
Two equal bowls squeezed into 26 in (65 cm) is the small-apartment answer to a double sink, so this plan block suits apartment kitchens, galley kitchens in narrow row houses, staff kitchens and vacation cabins. Put it on the floor plan where the run is short, and on a millwork plan where every centimeter of countertop is counted.
Clearances to leave
A 26 in (65 cm) sink drops into a 28 in (70 cm) base, near the bottom of the 24–36 in (60–90 cm) sink base range, so a 7 ft 10 in (240 cm) galley run holds landings of 18 in (46 cm) and 24 in (61 cm) plus a 24 in (60 cm) cooktop. The 17½ in (44 cm) bowls leave a generous rear ledge.
Pairs with
Narrow tapered swivel faucet spout is the faucet to add, and Narrow domino two-burner gas cooktop keeps the cooktop to the same scale. Compare Compact single-bowl sink with centered drain when one bowl will do.
Common questions
What are the dimensions of this block?
It measures 2' 2" | 65 cm wide by 17" | 44 cm deep. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.
Is there a 3D model of this block?
Yes. A 3D model built from this block's drawings, 2' 2" wide, 17" deep and 10½" high, is free to download in STEP, DXF 3D, OBJ, GLB, 3MF and STL.
File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.
Details
Collections
Drawing at scale3 views
Seen from above beside a standing person, both at the same scale.
3D model
Built at real size from the plan drawing, as pressed stainless sheet: the plate and every bowl with sloped walls, the strainer where the plan has its drain, the overflow on the back wall and the waste below; drainers, upstands and faucets where the drawing has them. Drag to orbit, underneath too; scroll or pinch to zoom.
Dimensions and sizes
Width 2' 2" | 65 cm, depth 17" | 44 cm, footprint 3.1 ft², height 10½" | 27 cm.
Explore at scale
How big is it?
Footprint 3.1 ft², about 0.2× the floor area of a twin bed.
On your sheet
At 1" = 1'-0" the drawing prints 2.15 in × 1.43 in on Letter.
In the room
Plan at real sizeAll 3 checks pass
Galley kitchen layout
Built around the compact double-bowl sink with equal bowls, the block you are viewing.
Checks
- Aisle in front of the sink4' 6"Minimum 3' 3", recommended 3' 6"
- Work aisle between countertops4' 1"Minimum 3' 6", recommended 4' 0"
- Door swing to the nearest fixture (door moved to fit)4"Minimum 2", recommended 4"
Design notes
- Work aisle 3' 6" for one cook, 4' 0" for two (42 and 48 in).
- Keep sink, cooktop and fridge within a few steps: each leg of the work triangle 3' 11" to 8' 10".
- Leave 15½" of landing countertop beside the cooktop and 23½" beside the sink.
The kit, 3 blocks