Tall wall mirror with moulded white frame
Free CAD block from the Beds with clearances library (90 blocks), drawn 1:1.
About this block
Tall wall mirror with moulded white frame, drawn in plan, front and side elevation, all three projected from its 3D model so they match to the millimeter. It measures 2' 11" wide, 2" deep and 6' 3" high (90 cm × 4.8 cm × 1.90 m), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling.
It also comes as a 3D model built from these drawings.
From the Beds with clearances library: 90 blocks drawn to one standard, each one available on its own.
In practice
Where it goes
A full-length mirror for a bedroom, a dressing area or a hallway: a tall pane of silvered glass in a wide white lacquered frame with a classic moulding, a rounded outer edge, a broad cove sloping down to the glass and a fine bead, mitered at the corners. It hangs on the wall with its long side upright. In a plan at ¼ in = 1 ft (1:50) it is a thin strip on the wall that marks where it goes; the front elevation is where the moulding and the mitres read.
Clearances to leave
The block is 35⅜ in (90 cm) wide, 74¾ in (190 cm) high and 1⅞ in (4.8 cm) deep from the wall, and the glass shows 26 in (66 cm) by 65⅜ in (166 cm). Hang it with the bottom of the frame 4 to 6 in (10 to 15 cm) above the floor: its top then sits at about 6 ft 7 in (2 m), and a person standing 5 to 6½ ft (1.5 to 2 m) away sees themselves from head to foot, so keep that space clear in front of it. Give it a stretch of wall at least 3 ft 3 in (1 m) wide, out of the swing of a door, and fix it with two hangers into solid wall or into plugs rated for its weight.
Pairs with
Hang it on the wall beside the bed or at the end of a run of wardrobes, across from the Three-drawer nightstand with round knobs and rounded corners. With the Queen bed with two pillows and double turn-down it completes a bedroom elevation, and the Slim-arm armchair with lumbar pillow beside it makes a dressing corner. The white lacquer suits pale walls and oak floors.
Common questions
What are the dimensions of this block?
It measures 2' 11" | 90 cm wide by 2" | 4.8 cm deep. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.
Is there a 3D model of this block?
Yes. A 3D model built from this block's drawings, 2' 11" wide, 2" deep and 6' 3" high, is free to download in STEP, DXF 3D, OBJ, GLB, 3MF and STL. It is a closed part, so it also prints at 1:50 or 1:100 for a scale model.
File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.
Details
Collections
Drawing at scale3 views
Seen from above beside a standing person, both at the same scale.
3D model
Built at real size from the plan drawing. Drag to orbit, underneath too; scroll or pinch to zoom.
Dimensions and sizes
Width 2' 11" | 90 cm, depth 2" | 4.8 cm, footprint 0.5 ft², height 6' 3" | 1.90 m.



Explore at scale
How big is it?
Footprint 0.5 ft², about 0.0× the floor area of a twin bed.
On your sheet
At 1" = 1'-0" the drawing prints 2.95 in × 0.16 in on Letter.
In the room
Plan at real sizeAll 4 checks pass
Bedroom layout
Built around the tall wall mirror with moulded white frame, the block you are viewing.
Checks
- Walkway, left of the bed5' 9"Minimum 2' 0", recommended 2' 6"
- Walkway, right of the bed5' 9"Minimum 2' 0", recommended 2' 6"
- Walkway at the foot of the bed12' 4"Minimum 2' 0", recommended 2' 6"
- Door swing to the nearest fixture15"Minimum 2", recommended 4"
Design notes
- Walkway beside the bed: 2' 0" minimum, 2' 6" recommended, 3' 0" ideal. These are the clearances drawn in the cadblock bed library.
- Keep about 2' 11" clear in front of a closet so the doors open and you can stand at it.
- Bedside tables 40 to 60 cm wide, with the top roughly level with the mattress, about 21½" to 2' 2" from the floor.
- Keep the door swing free of furniture, and avoid placing the bed in line with the door.
The kit, 5 blocks
