Bidet with raised rear edge and floor-standing pedestal
Free CAD block from the Toilets, sinks, bidets and urinals library (102 blocks), drawn 1:1.
About this block
Bidet with raised rear edge and floor-standing pedestal, drawn in side elevation. It measures 2' 1" wide and 17" high (63 cm × 43 cm), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling.
From the Toilets, sinks, bidets and urinals library: 102 blocks drawn to one standard, each one available on its own.
In practice
Where it goes
Sections through a bathroom wall are where the raised rear edge shows best, so the block goes into the long section of a family bathroom or a hotel suite, placed against the wall line with the pedestal on the finished floor. It also serves an interior elevation of the side wall where a bidet meets a tub.
Clearances to leave
At 17 in (43 cm) the rim is higher than the usual 16 in (40 cm), so a wall-mounted faucet or shelf needs to be set above it accordingly; the 25 in (63 cm) projection plus 24 in (60 cm) clear in front gives a 48 in (123 cm) minimum depth to the opposite wall, 54 in (138 cm) for comfort.
Pairs with
Matches the Bidet with square rear deck and offset faucet holes in plan and sits well next to the Thick-walled bathtub with wall-mounted spout and two handles in the same section, both on a wood-look porcelain floor.
Common questions
What are the dimensions of this block?
It measures 2' 1" | 63 cm wide by 17" | 43 cm high. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.
How tall is it compared with a person?
At 17" it reaches about 25% of the height of a 5' 9" adult.
File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.
Details
- Width
- 2' 1"63 cm
- Height
- 17"43 cm
- View
- Side elevation
- Scale
- 1:1, full size
- 2D formats
- DWG, DXF, SVG, PNGAutoCAD 2013, meters and inches
- Library
- Toilets, sinks, bidets and urinals
Also drawn as
Collections
Drawing at scaleSide elevation
Shown beside a 4' 9" (1.45 m) person, both at the same scale.
Dimensions and sizes
Width 2' 1" | 63 cm, height 17" | 43 cm.
Explore at scale
How big is it?
At 17" high it reaches 25% of an adult's height and 21% of a door.
On your sheet
At 1" = 1'-0" the drawing prints 2.08 in × 1.41 in on Letter.
In the room
Elevation at real sizeCheck passes
Fixture in section
Built around the bidet with raised rear edge and floor-standing pedestal, the block you are viewing.
Checks
- Projection2' 1"Recommended 19½" to 2' 6"
Design notes
- Wall-hung and back-to-wall pans project 19½" to 23½"; close-coupled toilets need 2' 2" to 2' 6".
- Add the projection to the 2' 6" of clear floor in front to get the room depth you need.
- Section views like this one are what plumbers ask for: they show where the outlet and the supply sit.
The kit, 2 blocks