Trapezoid pedestal sink with D-shaped bowl
Free CAD block from the Toilets, sinks, bidets and urinals library (102 blocks), drawn 1:1.
About this block
Trapezoid pedestal sink with D-shaped bowl, drawn in plan, front and side elevation, each view as drawn in the original library file. It measures 2' 1" wide, 19½" deep and 2' 7" high (64 cm × 49 cm × 79 cm), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling.
It also comes as a 3D model built from these drawings.
From the Toilets, sinks, bidets and urinals library: 102 blocks drawn to one standard, each one available on its own.
In practice
Where it goes
Plan of a trapezoid pedestal sink, wider at the wall than at the front, with a D-shaped bowl. Fits floor plans of apartment bathrooms and small hotel rooms where the splayed sides make a tight corner easier, and plumbing layouts where the bowl outline helps position the drain.
Clearances to leave
At 25 in (64 cm) across the back edge it nearly fills a 28 in (70 cm) bay, so avoid adding a cabinet alongside. With a 19½ in (49 cm) depth the sink takes less floor than most, and 22 in (55 cm) clear in front gives a 41 in (104 cm) wall-to-fixture distance.
Pairs with
In the same plan it sits well with the Rectangular shower tray with sloped floor and end drain and the Skirted two-piece toilet with pointed oval seat, all on one wall; the side elevation shows the sloping rim and the stepped column.
Common questions
What are the dimensions of this block?
It measures 2' 1" | 64 cm wide by 19½" | 49 cm deep. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.
Is there a 3D model of this block?
Yes. A 3D model built from this block's drawings, 2' 2" wide, 20" deep and 2' 7" high, is free to download in STEP, DXF 3D, OBJ, GLB, 3MF and STL. It is a closed part, so it also prints at 1:50 or 1:100 for a scale model.
File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.
Details
Collections
Drawing at scale3 views
Seen from above beside a standing person, both at the same scale.
3D model
Built at real size from the plan, front and side drawings, as pressed stainless sheet: the plate and every bowl with sloped walls, the strainer where the plan has its drain, the overflow on the back wall and the waste below; drainers, upstands and faucets where the drawing has them. Drag to orbit, underneath too; scroll or pinch to zoom.
Dimensions and sizes
Width 2' 1" | 64 cm, depth 19½" | 49 cm, footprint 3.4 ft², height 2' 7" | 79 cm.
Explore at scale
How big is it?
Footprint 3.4 ft², about 0.2× the floor area of a twin bed.
On your sheet
At 1" = 1'-0" the drawing prints 2.11 in × 1.62 in on Letter.
In the room
Plan at real sizeWorks, 1 not ideal
Bathroom layout
Built around the trapezoid pedestal sink with D-shaped bowl, the block you are viewing.
Checks
- Clear floor in front of the sink23"Minimum 21", recommended 2' 6"
- Door swing to the nearest fixture5½"Minimum 2", recommended 4"
Design notes
- Toilet and bidet: center line at least 15" from a wall or fixture, 18" recommended.
- Clear floor in front of each fixture: 21" minimum, 2' 6" recommended.
- Sink rim at 2' 7" to 2' 11"; a double vanity needs about 2' 11" between faucets.
- For a wheelchair, plan a 4' 11" turning circle clear of fixtures.
- Keep the door swing at least 2" clear of every fixture, 4" recommended; in a small bathroom the door can open outward or slide.
The kit, 3 blocks