Dishwasher with grooved front panel
Free CAD block from the Kitchen appliances library (124 blocks), drawn 1:1.
About this block
Dishwasher with grooved front panel, drawn in plan, front and side elevation, all three projected from its 3D model so they match to the millimeter. It measures 23½" wide, 2' 10" high and 2' 0" deep (60 cm × 85 cm × 61 cm), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling.
It also comes as a 3D model built from these drawings.
From the Kitchen appliances library: 124 blocks drawn to one standard, each one available on its own.
In practice
Where it goes
Family kitchens, apartments and small restaurant dishwashing areas all use the 24 in (60 cm) bay this dishwasher fills, its grooved panel marking it out from the cabinet doors. The 33 in (85 cm) height fits under a standard countertop. Draw it in interior elevations and sections of the sink run, next to the sink base where the plumbing is shortest.
Clearances to leave
Keep it within 36 in (90 cm) of the sink and leave 24 in (60 cm) in front for the drop-down door plus 20 in (50 cm) to stand at it, which means a 43 in (110 cm) aisle at least. Its 33 in (85 cm) height slides under a 36 in (90 cm) countertop with a toe kick below.
Pairs with
Pair it with the Rounded double-bowl sink with swivel faucet next door and the Four-burner gas cooktop with split grates and side knobs on the same run, with the grooved panel in stainless steel.
Common questions
What are the dimensions of this block?
It measures 23½" | 60 cm wide by 2' 10" | 85 cm high. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.
Is there a 3D model of this block?
Yes. A 3D model built from this block's drawings, 23½" wide, 2' 0" deep and 2' 10" high, is free to download in STEP, DXF 3D, OBJ, GLB, 3MF and STL.
File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.
Details
Collections
Drawing at scale3 views
Shown beside a 5' 9" (1.75 m) person, both at the same scale.
3D model
Built at real size from the front drawing, with the doors, the controls and the handles where the front shows them, at the usual depth. Drag to orbit, underneath too; scroll or pinch to zoom.
Dimensions and sizes
Width 23½" | 60 cm, height 2' 10" | 85 cm, depth 2' 0" | 61 cm.
Explore at scale
How big is it?
At 2' 10" high it reaches 49% of an adult's height and 41% of a door.
On your sheet
At 1" = 1'-0" the drawing prints 1.98 in × 2.79 in on Letter.
In the room
Elevation at real sizeAll 2 checks pass
Kitchen elevation
Built around the dishwasher with grooved front panel, the block you are viewing.
Checks
- Countertop2' 11"Recommended 2' 11" to 3' 2"
- Hood above the cooktop2' 4"Recommended 2' 2" to 2' 6"
Design notes
- Countertop at 2' 11"; tall cooks are happier at 3' 1".
- Hood 2' 2" to 2' 6" above a gas cooktop, 21½" to 2' 2" above induction.
- Wall cabinets start 19½" to 23½" above the countertop.
- Leave at least 15½" of countertop on each side of the cooktop.
The kit, 7 blocks