Double-bowl sink with tapered bowls and faucet
Free CAD block from the Kitchen sinks library (155 blocks), drawn 1:1.
About this block
Double-bowl sink with tapered bowls and faucet, drawn in section. It measures 2' 10" wide and 2' 2" high (86 cm × 66 cm), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling. Set into the countertop: countertop at 2' 11".
From the Kitchen sinks library: 155 blocks drawn to one standard, each one available on its own.
In practice
Where it goes
The tapered bowls give this section a sloping bowl wall, which reads clearly in a ½ in = 1 ft (1:20) cut through a kitchen wall and distinguishes it from the flat-sided undermount profile. Use it where the sink run faces the viewer in a section, in a cafe counter section with two bowls for wash and rinse, and in a service kitchen detail.
Clearances to leave
At 34 in (86 cm) wide the double bowl needs a 36 in (90 cm) base cabinet, the top of the usual sink base range. Keep 24 in (61 cm) of countertop beyond one bowl and 18 in (46 cm) beyond the other for stacking, hold the countertop at 36 in (91 cm), and allow 48 in (122 cm) in front if two people wash and dry at once.
Pairs with
Combine it with Double-bowl sink with gooseneck faucet and waste pipes for the front view and Equal double-bowl sink with central faucet hole for plan. Two bowls in a brushed steel top with a tiled backsplash suits a small restaurant kitchen.
Common questions
What are the dimensions of this block?
It measures 2' 10" | 86 cm wide by 2' 2" | 66 cm high. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.
At what height is it installed?
Set into the countertop: countertop at 2' 11". The drawings above show it at that height beside a person, so the clearance reads at a glance.
File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.
Details
- Width
- 2' 10"86 cm
- Height
- 2' 2"66 cm
- Mounting height
- 2' 4" to the undersideSet into the countertop, countertop at 2' 11"
- View
- Section
- Scale
- 1:1, full size
- 2D formats
- DWG, DXF, SVG, PNGAutoCAD 2013, meters and inches
- Library
- Kitchen sinks
Collections
Drawing at scaleSection
Set into the countertop, countertop at 2' 11": drawn 1:1 at its mounting height. Shown beside a 5' 7" (1.69 m) person, both at the same scale.
Dimensions and sizes
Width 2' 10" | 86 cm, height 2' 2" | 66 cm, set into the countertop with the underside at 2' 4" | 71 cm.
Explore at scale
How big is it?
Set into the countertop with its top at 4' 6", which is 79% of an adult's height.
On your sheet
At 1" = 1'-0" the drawing prints 2.81 in × 2.15 in on Letter.