One-and-a-half bowl sink with deck faucet
Free CAD block from the Kitchen sinks library (155 blocks), drawn 1:1.
About this block
One-and-a-half bowl sink with deck faucet, drawn in plan, front and side elevation, all three projected from its 3D model so they match to the millimeter. It measures 2' 9" wide, 22" deep and 21½" high (84 cm × 56 cm × 55 cm), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling.
It also comes as a 3D model built from these drawings.
From the Kitchen sinks library: 155 blocks drawn to one standard, each one available on its own.
In practice
Where it goes
Deeper than most at 22 in (56 cm), this one-and-a-half bowl sink with its deck-mounted faucet belongs on plans of kitchens with a 25 in (64 cm) countertop and a window above, where the faucet deck sits almost against the sill. Draw it in a family kitchen plan, a vacation home layout and a millwork plan where the depth needs checking.
Clearances to leave
At 33 in (84 cm) wide and 22 in (56 cm) deep, the sink fills a 25 in (64 cm) countertop almost to the backsplash, so a window sill needs to clear the faucet deck. Take a 36 in (90 cm) base cabinet, keep landings of 24 in (61 cm) and 18 in (46 cm) beside it, and leave the standard 42–48 in (107–122 cm) aisle.
Pairs with
Set it next to One-and-a-half bowl sink with square divider, the shallower version without a faucet, and One-and-a-half bowl sink with rear-set drains. Four-burner gas-on-glass cooktop with knob strip keeps the same clean look along the run.
Common questions
What are the dimensions of this block?
It measures 2' 9" | 84 cm wide by 22" | 56 cm deep. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.
Is there a 3D model of this block?
Yes. A 3D model built from this block's drawings, 2' 9" wide, 22" deep and 21½" high, is free to download in STEP, DXF 3D, OBJ, GLB, 3MF and STL.
File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.
Details
Collections
Drawing at scale3 views
Seen from above beside a standing person, both at the same scale.
3D model
Built at real size from the plan drawing, as pressed stainless sheet: the plate and every bowl with sloped walls, the strainer where the plan has its drain, the overflow on the back wall and the waste below; drainers, upstands and faucets where the drawing has them. Drag to orbit, underneath too; scroll or pinch to zoom.
Dimensions and sizes
Width 2' 9" | 84 cm, depth 22" | 56 cm, footprint 5.0 ft², height 21½" | 55 cm.
Explore at scale
How big is it?
Footprint 5.0 ft², about 0.3× the floor area of a twin bed.
On your sheet
At 1" = 1'-0" the drawing prints 2.75 in × 1.83 in on Letter.
In the room
Plan at real sizeAll 3 checks pass
Galley kitchen layout
Built around the one-and-a-half bowl sink with deck faucet, the block you are viewing.
Checks
- Aisle in front of the sink4' 2"Minimum 3' 3", recommended 3' 6"
- Work aisle between countertops4' 1"Minimum 3' 6", recommended 4' 0"
- Door swing to the nearest fixture (door moved to fit)4"Minimum 2", recommended 4"
Design notes
- Work aisle 3' 6" for one cook, 4' 0" for two (42 and 48 in).
- Keep sink, cooktop and fridge within a few steps: each leg of the work triangle 3' 11" to 8' 10".
- Leave 15½" of landing countertop beside the cooktop and 23½" beside the sink.
The kit, 3 blocks