Mannequin figure seated upright, hands on knees
Free CAD block from the People seated and standing library (54 blocks), drawn 1:1.
About this block
Mannequin figure seated upright, hands on knees, drawn in front elevation. It measures 20½" wide and 4' 3" high (52 cm × 1.30 m), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling.
From the People seated and standing library: 54 blocks drawn to one standard, each one available on its own.
In practice
Where it goes
Hands on knees and a straight back make this the attentive seated figure for a classroom section, a courtroom elevation, a dentist's waiting area or a church pew. Put it at a desk in a school section where the desk top should land a hand above the lap, or in a pew elevation to set the pew height.
Clearances to leave
Sitting 51 in (130 cm) high, this figure is shorter than most seated blocks here, so a 30 in (75 cm) table top meets it just above the lap and a 18 in (45 cm) seat is the right chair. At 20½ in (52 cm) wide it allows 24 in (60 cm) per place on a bench with a little shoulder room.
Pairs with
Alternate it with the Mannequin figure seated with one forearm across lap along a bench elevation, and draw the Seated mannequin figure with arms reaching to knees in the plan of the same room. On a church pew, five in a row set the pew length.
Common questions
What are the dimensions of this block?
It measures 20½" | 52 cm wide by 4' 3" | 1.30 m high. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.
File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.
Details
- Width
- 20½"52 cm
- Height
- 4' 3"1.30 m
- View
- Front elevation
- Scale
- 1:1, full size
- 2D formats
- DWG, DXF, SVG, PNGAutoCAD 2013, meters and inches
- Library
- People seated and standing
Collections
Drawing at scaleFront elevation
Drawn 1:1. Scale bar for reference.
Dimensions and sizes
Width 20½" | 52 cm, height 4' 3" | 1.30 m.
Explore at scale
How big is it?
Figure height 4' 3", shown beside an interior door.
On your sheet
At 1" = 1'-0" the drawing prints 1.71 in × 4.28 in on Letter.
In the room
Elevation at real size
Street front elevation
Built around the mannequin figure seated upright, hands on knees, the block you are viewing.
Design notes
- Street trees are usually planted 19' 8" to 32' 10" apart, at least 3' 3" from the curb.
- A parallel parking bay is about 6' 7" to 8' 2" wide and 18' 1" to 19' 8" long.
- People and cars at real size give clients an instant sense of scale in a facade drawing.
The kit, 7 blocks