Offset double-bowl sink with swivel faucet
Free CAD block from the Kitchen sinks library (155 blocks), drawn 1:1.
About this block
Offset double-bowl sink with swivel faucet, drawn in plan, front and side elevation. It measures 2' 3" wide, 16½" deep and 22" high (69 cm × 42 cm × 56 cm), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling.
It also comes as a 3D model built from these drawings.
From the Kitchen sinks library: 155 blocks drawn to one standard, each one available on its own.
In practice
Where it goes
An offset pair of bowls with a swivel faucet drawn between them packs a double sink into 27 in (68 cm), so this plan block goes on small kitchen layouts: a one-bedroom apartment, a boat or RV plan, a staff kitchen in an office. The swivel spout shows that one faucet serves both bowls.
Clearances to leave
Fit the 27 in (68 cm) sink in a 28 in (70 cm) base and, with the bowls only 16½ in (42 cm) deep, a 25 in (64 cm) countertop leaves a wide ledge for the swivel base. Hold 24 in (61 cm) of counter on one side at least; in a galley, 42 in (107 cm) between facing runs is the minimum.
Pairs with
Compare Compact double-bowl sink with equal bowls, which has no faucet, and Rounded double-bowl sink with swivel faucet in the appliances library. Tabletop two-burner gas stove with slotted center beside it suits an RV or boat galley.
Common questions
What are the dimensions of this block?
It measures 2' 3" | 69 cm wide by 16½" | 42 cm deep. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.
Is there a 3D model of this block?
Yes. A 3D model built from this block's drawings, 2' 3" wide, 16½" deep and 22" high, is free to download in STEP, DXF 3D, OBJ, GLB, 3MF and STL.
File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.
Details
Collections
Drawing at scale3 views
Seen from above beside a standing person, both at the same scale.
3D model
Built at real size from the plan drawing, as pressed stainless sheet: the plate and every bowl with sloped walls, the strainer where the plan has its drain, the overflow on the back wall and the waste below; drainers, upstands and faucets where the drawing has them. Drag to orbit, underneath too; scroll or pinch to zoom.
Dimensions and sizes
Width 2' 3" | 69 cm, depth 16½" | 42 cm, footprint 3.1 ft², height 22" | 56 cm.
Explore at scale
How big is it?
Footprint 3.1 ft², about 0.2× the floor area of a twin bed.
On your sheet
At 1" = 1'-0" the drawing prints 2.25 in × 1.37 in on Letter.
In the room
Plan at real sizeAll 3 checks pass
Galley kitchen layout
Built around the offset double-bowl sink with swivel faucet, the block you are viewing.
Checks
- Aisle in front of the sink4' 7"Minimum 3' 3", recommended 3' 6"
- Work aisle between countertops4' 1"Minimum 3' 6", recommended 4' 0"
- Door swing to the nearest fixture (door moved to fit)4"Minimum 2", recommended 4"
Design notes
- Work aisle 3' 6" for one cook, 4' 0" for two (42 and 48 in).
- Keep sink, cooktop and fridge within a few steps: each leg of the work triangle 3' 11" to 8' 10".
- Leave 15½" of landing countertop beside the cooktop and 23½" beside the sink.
The kit, 3 blocks