Tabletop two-burner gas stove with slotted center
Free CAD block from the Ranges and cooktops library (144 blocks), drawn 1:1.
About this block
Tabletop two-burner gas stove with slotted center, drawn in plan, front and side elevation, all three projected from its 3D model so they match to the millimeter. It measures 2' 5" wide, 15½" deep and 4½" high (73 cm × 40 cm × 11 cm), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling.
It also comes as a 3D model built from these drawings.
From the Ranges and cooktops library: 144 blocks drawn to one standard, each one available on its own.
In practice
Where it goes
Meant for layouts of hostel kitchens, cafeteria prep corners and rented rooms where a loose two-burner stove is the whole cooking provision. The slotted center strip marks the burner spacing at a glance, so the block reads even on a ⅛ in = 1 ft (1:100) floor plan. Draw it over its base cabinet with the front edge flush to the counter; the straight-front elevation shows it face-on.
Clearances to leave
At 28 in (72 cm) wide it overhangs a single 24 in (60 cm) base cabinet, so plan the counter so that it straddles two cabinets rather than ending on a joint. Add 24 in (60 cm) of clear countertop on the pan side, keep the 15½ in (40 cm) depth centered on the top, and allow 42–48 in (107–122 cm) of aisle.
Pairs with
Pairs with the Built-in two-burner gas cooktop with front knobs when a plan shows a loose stove and a built-in one in the same room, and with the Rounded double-bowl sink with swivel faucet across a stainless-steel countertop.
Common questions
What are the dimensions of this block?
It measures 2' 5" | 73 cm wide by 15½" | 40 cm deep. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.
Is there a 3D model of this block?
Yes. A 3D model built from this block's drawings, 2' 5" wide, 15½" deep and 4½" high, is free to download in STEP, DXF 3D, OBJ, GLB, 3MF and STL.
File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.
Details
Collections
Drawing at scale3 views
Seen from above beside a standing person, both at the same scale.
3D model
Built at real size from the plan drawing, at its real thickness: the top in pressed steel or black glass, each burner with its crown and cap under cast-iron grates or supports, electric plates or zones where the plan has them, and the knobs. Drag to orbit, underneath too; scroll or pinch to zoom.
Dimensions and sizes
Width 2' 5" | 73 cm, depth 15½" | 40 cm, footprint 3.1 ft², height 4½" | 11 cm.
Explore at scale
How big is it?
Footprint 3.1 ft², about 0.2× the floor area of a twin bed.
On your sheet
At 1" = 1'-0" the drawing prints 2.38 in × 1.30 in on Letter.
In the room
Plan at real sizeAll 3 checks pass
Galley kitchen layout
Built around the tabletop two-burner gas stove with slotted center, the block you are viewing.
Checks
- Aisle in front of the cooktop4' 8"Minimum 3' 3", recommended 3' 6"
- Work aisle between countertops4' 1"Minimum 3' 6", recommended 4' 0"
- Door swing to the nearest fixture (door moved to fit)4"Minimum 2", recommended 4"
Design notes
- Work aisle 3' 6" for one cook, 4' 0" for two (42 and 48 in).
- Keep sink, cooktop and fridge within a few steps: each leg of the work triangle 3' 11" to 8' 10".
- Leave 15½" of landing countertop beside the cooktop and 23½" beside the sink.
The kit, 3 blocks