Pedestal sink with semicircular front and three faucet holes
Free CAD block from the Toilets, sinks, bidets and urinals library (98 blocks), drawn 1:1.
About this block
Pedestal sink with semicircular front and three faucet holes, drawn in plan, front and side elevation, each view as drawn in the original library file. It measures 2' 0" wide, 22" deep and 2' 9" high (62 cm × 56 cm × 83 cm), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling.
It also comes as a 3D model built from these drawings.
From the Toilets, sinks, bidets and urinals library: 98 blocks drawn to one standard, each one available on its own.
In practice
Where it goes
For floor plans where the sink has a straight back against the wall and a semicircular front into the room, with three faucet holes for a widespread faucet. Suits hotel bathrooms, period renovations and restaurant restrooms; it also serves the layout plan where the holes locate the faucet.
Clearances to leave
Give it a 28 in (70 cm) bay for the 24 in (62 cm) width, and keep 8 in (20 cm) between rims in a two-sink powder room. The 22 in (56 cm) projection with 24 in (60 cm) in front needs 46 in (116 cm) to the opposite wall, 44 in (111 cm) at the 22 in (55 cm) minimum.
Pairs with
In plan, the Two-piece toilet with tapered bowl and round seat sits next to it on the same wall; the front and side elevations show the sculpted apron, the long sloping basin and the tapered column.
Common questions
What are the dimensions of this block?
It measures 2' 0" | 62 cm wide by 22" | 56 cm deep. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.
Is there a 3D model of this block?
Yes. A 3D model built from this block's drawings, 2' 0" wide, 21½" deep and 2' 9" high, is free to download in STEP, DXF 3D, OBJ, GLB, 3MF and STL. It is a closed part, so it also prints at 1:50 or 1:100 for a scale model.
File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.
Details
Collections
Drawing at scale3 views
Seen from above beside a standing person, both at the same scale.
3D model
Built at real size from the plan, front and side drawings, as pressed stainless sheet: the plate and every bowl with sloped walls, the strainer where the plan has its drain, the overflow on the back wall and the waste below; drainers, upstands and faucets where the drawing has them. Drag to orbit, underneath too; scroll or pinch to zoom.
Dimensions and sizes
Width 2' 0" | 62 cm, depth 22" | 56 cm, footprint 3.7 ft², height 2' 9" | 83 cm.



Explore at scale
How big is it?
Footprint 3.7 ft², about 0.2× the floor area of a twin bed.
On your sheet
At 1" = 1'-0" the drawing prints 2.03 in × 1.82 in on Letter.
In the room
Plan at real sizeWorks, 1 not ideal
Bathroom layout
Built around the pedestal sink with semicircular front and three faucet holes, the block you are viewing.
Checks
- Clear floor in front of the sink21"Minimum 21", recommended 2' 6"
- Door swing to the nearest fixture5½"Minimum 2", recommended 4"
Design notes
- Toilet and bidet: center line at least 15" from a wall or fixture, 18" recommended.
- Clear floor in front of each fixture: 21" minimum, 2' 6" recommended.
- Sink rim at 2' 7" to 2' 11"; a double vanity needs about 2' 11" between faucets.
- For a wheelchair, plan a 4' 11" turning circle clear of fixtures.
- Keep the door swing at least 2" clear of every fixture, 4" recommended; in a small bathroom the door can open outward or slide.
The kit, 3 blocks
