Racetrack table for six with plain chairs
Free CAD block from the Minimalist tables and chairs library (132 blocks), drawn 1:1.
About this block
Racetrack table for six with plain chairs, drawn in plan, front and side elevation, the front and side elevations projected from its 3D model with hidden lines removed. It measures 10' 6" wide, 7' 1" deep and 2' 10" high (3.20 m × 2.16 m × 86 cm), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling.
It also comes as a 3D model built from these drawings.
From the Minimalist tables and chairs library: 132 blocks drawn to one standard, each one available on its own.
In practice
Where it goes
Six schematic chairs on a racetrack top, three a side and none at the ends, is the plan symbol for a meeting room where the ends are kept clear for a presenter and a cart. It goes on early build-out plans for offices, schools and clinics; the same table outline as the eight-seater lets the two be swapped as the brief changes.
Clearances to leave
The footprint matches the eight-seat version at 10 ft 6 in by 7 ft 1 in (320 by 216 cm), but without end chairs each sitter has about 36 in (90 cm) of edge. Leave 40 in (100 cm) behind the chairs and 48 in (120 cm) at the presentation end; the far end needs only 36 in (91 cm).
Pairs with
The Racetrack table for eight with plain chairs adds two seats; the Short racetrack table for six with angled plain chairs is the informal version. A clinic waiting corner takes the Two-seat sofa with separate bolster back and arm pads.
Common questions
What are the dimensions of this block?
It measures 10' 6" | 3.20 m wide by 7' 1" | 2.16 m deep. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.
Is there a 3D model of this block?
Yes. A 3D model built from this block's drawings, 10' 9" wide, 7' 4" deep and 2' 10" high, is free to download in STEP, DXF 3D, OBJ, GLB, 3MF and STL. It is a closed part, so it also prints at 1:50 or 1:100 for a scale model.
File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.
Details
Collections
Drawing at scale3 views
Seen from above beside a standing person, both at the same scale.
3D model
Built at real size from the plan drawing, as a top on four legs at standard height. Drag to orbit, underneath too; scroll or pinch to zoom.
Dimensions and sizes
Width 10' 6" | 3.20 m, depth 7' 1" | 2.16 m, footprint 74.4 ft², height 2' 10" | 86 cm.
Explore at scale
How big is it?
Footprint 74.4 ft², about 3.8× the floor area of a twin bed.
On your sheet
At 1/2" = 1'-0" the drawing prints 5.25 in × 3.54 in on Letter.
In the room
Plan at real sizeWorks, 1 not ideal
Dining room layout
Built around the racetrack table for six with plain chairs, the block you are viewing.
Checks
- Behind the chairs, left side2' 1"Minimum 17½", recommended 2' 2"
- Behind the chairs, right side3' 7"Minimum 17½", recommended 2' 2"
- Behind the chairs, bottom side3' 1"Minimum 17½", recommended 2' 2"
- Behind the chairs, top side3' 5"Minimum 17½", recommended 2' 2"
- Door swing to the nearest fixture17½"Minimum 2", recommended 4"
Design notes
- Measured from the chair backs: 17½" lets a guest pull a chair out, 2' 2" lets someone walk behind a seated guest.
- From the table edge that is about 3' 0" and 3' 8".
- Allow about 23½" of table edge per person and 15½" of depth for each place setting.
- Hang a pendant 2' 4" to 2' 9" above the table top.
The kit, 3 blocks