Rectangular table for six with curved-back chairs
Free CAD block from the Minimalist tables and chairs library (132 blocks), drawn 1:1.
About this block
Rectangular table for six with curved-back chairs, drawn in plan, front and side elevation, the front and side elevations projected from its 3D model with hidden lines removed. It measures 9' 10" wide, 7' 3" deep and 2' 10" high (3.00 m × 2.20 m × 87 cm), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling.
It also comes as a 3D model built from these drawings.
From the Minimalist tables and chairs library: 132 blocks drawn to one standard, each one available on its own.
In practice
Where it goes
A straight six-seater with two chairs a side and one at each end is the most common dining and meeting table there is, so this plan block gets used in apartments, houses, small offices and hotel suites. The curved-back chairs give it a domestic feel on a furniture layout, and the end chairs are easy to delete when the table goes against a wall.
Clearances to leave
The block covers 9 ft 10 in by 7 ft 3 in (300 by 220 cm) with every chair drawn out, so most of the pull-out zone is already inside it. Add 24 in (60 cm) beyond the chair backs where people pass and 36 in (90 cm) on the main route; deleting the end chairs shortens it by about 39 in (100 cm).
Pairs with
The Compact rectangular table for six with curved-back chairs is the same arrangement with the chairs tucked closer. For a hotel suite plan, add the Armchair with rounded track arms and deep back and a Rectangular coffee table with inset top on the lounge side.
Common questions
What are the dimensions of this block?
It measures 9' 10" | 3.00 m wide by 7' 3" | 2.20 m deep. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.
Is there a 3D model of this block?
Yes. A 3D model built from this block's drawings, 9' 8" wide, 7' 1" deep and 2' 10" high, is free to download in STEP, DXF 3D, OBJ, GLB, 3MF and STL. It is a closed part, so it also prints at 1:50 or 1:100 for a scale model.
File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.
Details
Collections
Drawing at scale3 views
Seen from above beside a standing person, both at the same scale.
3D model
Built at real size from the plan drawing, as a top on four legs at standard height. Drag to orbit, underneath too; scroll or pinch to zoom.
Dimensions and sizes
Width 9' 10" | 3.00 m, depth 7' 3" | 2.20 m, footprint 71.0 ft², height 2' 10" | 87 cm.
Explore at scale
How big is it?
Footprint 71.0 ft², about 3.7× the floor area of a twin bed.
On your sheet
At 1/2" = 1'-0" the drawing prints 4.92 in × 3.61 in on Letter.
In the room
Plan at real sizeWorks, 1 not ideal
Dining room layout
Built around the rectangular table for six with curved-back chairs, the block you are viewing.
Checks
- Behind the chairs, left side2' 1"Minimum 17½", recommended 2' 2"
- Behind the chairs, right side3' 7"Minimum 17½", recommended 2' 2"
- Behind the chairs, bottom side3' 1"Minimum 17½", recommended 2' 2"
- Behind the chairs, top side3' 5"Minimum 17½", recommended 2' 2"
- Door swing to the nearest fixture17½"Minimum 2", recommended 4"
Design notes
- Measured from the chair backs: 17½" lets a guest pull a chair out, 2' 2" lets someone walk behind a seated guest.
- From the table edge that is about 3' 0" and 3' 8".
- Allow about 23½" of table edge per person and 15½" of depth for each place setting.
- Hang a pendant 2' 4" to 2' 9" above the table top.
The kit, 3 blocks