Two-seat sofa with bolster backs and cross-marked cushions
Free CAD block from the Sofas library (193 blocks), drawn 1:1.
About this block
Two-seat sofa with bolster backs and cross-marked cushions, drawn in plan, front and side elevation, the elevations drawn to match the plan. It measures 4' 9" wide, 2' 5" deep and 2' 8" high (1.45 m × 75 cm × 82 cm), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling.
It also comes as a 3D model built from these drawings.
From the Sofas library: 193 blocks drawn to one standard, each one available on its own.
In practice
Where it goes
Small apartments, studios, staff rooms and the waiting area of a dental practice are the natural homes for a two-seater of this size. On the plan it goes against the longest clear wall or facing the television, and the cross-marked cushions are worth keeping at ¼ in = 1 ft (1:50) because they show two places rather than a bench.
Clearances to leave
Keep the cushion line 16–18 in (40–45 cm) from a coffee table and 24 in (60 cm) at either end for a side table. The 57 in (145 cm) width gives two 28 in (72 cm) seats, over the 24 in (60 cm) minimum, and the 29 in (74 cm) depth leaves a 36 in (90 cm) route in a 10 ft 6 in (3.2 m) room.
Pairs with
Its natural partners are the Armchair with bolster back and cross-marked cushion and, in a bigger room, the Four-seat sofa with bolster backs and cross-marked cushions. Put the Small square side table with inset top at one end and give the bolsters a contrasting piping.
Common questions
What are the dimensions of this block?
It measures 4' 9" | 1.45 m wide by 2' 5" | 75 cm deep. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.
Is there a 3D model of this block?
Yes. A 3D model built from this block's drawings, 4' 9" wide, 2' 5" deep and 2' 7" high, is free to download in STEP, DXF 3D, OBJ, GLB, 3MF and STL.
File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.
Details
Collections
Drawing at scale3 views
Seen from above beside a standing person, both at the same scale.
3D model
Built at real size from the plan drawing, as a base with backrest, arms and seat cushions at standard heights (seat 44 cm, arms 62 cm, back 80 cm). Drag to orbit, underneath too; scroll or pinch to zoom.
Dimensions and sizes
Width 4' 9" | 1.45 m, depth 2' 5" | 75 cm, footprint 11.7 ft², height 2' 8" | 82 cm.
Explore at scale
How big is it?
Footprint 11.7 ft², about 0.6× the floor area of a twin bed.
On your sheet
At 1" = 1'-0" the drawing prints 4.77 in × 2.44 in on Letter.
In the room
Plan at real sizeAll 4 checks pass
Living room layout
Built around the two-seat sofa with bolster backs and cross-marked cushions, the block you are viewing.
Checks
- Sofa to coffee table17½"Recommended 15½" to 19½"
- Walkway in front of the TV wall6' 10"Minimum 2' 6", recommended 3' 0"
- Viewing distance to a 65-inch screen10' 11"Recommended 6' 7" to 11' 2"
- Door swing to the nearest fixture2' 3"Minimum 2", recommended 4"
Design notes
- Coffee table 15½" to 19½" from the sofa: close enough to reach a cup, far enough for your knees.
- Keep main walkways 3' 0" wide; 2' 6" is the tightest comfortable passage.
- For a 65-inch screen, sit about 6' 7" to 11' 2" away, measured from the seated head.
- Armchairs facing each other across the table make a conversation area; keep the seats within about 9' 10" of each other.
The kit, 7 blocks