Diagonal square dining table with four round-seat chairs
Free CAD block from the Dining tables with chairs library (86 blocks), drawn 1:1.
About this block
Diagonal square dining table with four round-seat chairs, drawn in plan, front and side elevation, the front and side elevations projected from its 3D model with hidden lines removed. It measures 4' 7" wide, 4' 7" deep and 2' 10" high (1.41 m × 1.41 m × 87 cm), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling.
It also comes as a 3D model built from these drawings.
From the Dining tables with chairs library: 86 blocks drawn to one standard, each one available on its own.
In practice
Where it goes
Small apartments, studios and breakfast corners suit a square table turned 45 degrees on plan. Drop it into a floor plan where a kitchen opens onto a living area, one chair pointing at each wall; the round seats read clearly at ¼ in = 1 ft (1:50) without looking like stools. The diagonal set-up also fits a bay window or a corner nook in a café layout.
Clearances to leave
The diagonal footprint is 4 ft 7 in (141 cm) across the chairs, so the corners reach farther than a square placed straight. Keep 36 in (91 cm) from each chair back to the wall for pulling out, and 44 in (110 cm) where someone walks past a seated diner; a 11 ft (3.3 m) square dining area takes it.
Pairs with
Set it beside the Two-seat sofa with slim arms and projecting seat for a one-room apartment, or pair it with the Rectangular coffee table with inset top across a rug. A wood top with four pale chairs keeps the diagonal reading light.
Common questions
What are the dimensions of this block?
It measures 4' 7" | 1.41 m wide by 4' 7" | 1.41 m deep. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.
Is there a 3D model of this block?
Yes. A 3D model built from this block's drawings, 4' 9" wide, 4' 10" deep and 2' 10" high, is free to download in STEP, DXF 3D, OBJ, GLB, 3MF and STL. It is a closed part, so it also prints at 1:50 or 1:100 for a scale model.
File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.
Details
Collections
Drawing at scale3 views
Seen from above beside a standing person, both at the same scale.
3D model
Built at real size from the plan drawing, as a top on four legs at standard height. Drag to orbit, underneath too; scroll or pinch to zoom.
Dimensions and sizes
Width 4' 7" | 1.41 m, depth 4' 7" | 1.41 m, footprint 21.4 ft², height 2' 10" | 87 cm.
Explore at scale
How big is it?
Footprint 21.4 ft², about 1.1× the floor area of a twin bed.
On your sheet
At 1" = 1'-0" the drawing prints 4.62 in × 4.62 in on Letter.
In the room
Plan at real sizeAll 5 checks pass
Dining room layout
Built around the diagonal square dining table with four round-seat chairs, the block you are viewing.
Checks
- Behind the chairs, left side3' 0"Minimum 17½", recommended 2' 2"
- Behind the chairs, right side4' 7"Minimum 17½", recommended 2' 2"
- Behind the chairs, bottom side3' 9"Minimum 17½", recommended 2' 2"
- Behind the chairs, top side4' 1"Minimum 17½", recommended 2' 2"
- Door swing to the nearest fixture2' 0"Minimum 2", recommended 4"
Design notes
- Measured from the chair backs: 17½" lets a guest pull a chair out, 2' 2" lets someone walk behind a seated guest.
- From the table edge that is about 3' 0" and 3' 8".
- Allow about 23½" of table edge per person and 15½" of depth for each place setting.
- Hang a pendant 2' 4" to 2' 9" above the table top.
The kit, 3 blocks