Square dining table for four with rounded corners
Free CAD block from the Dining tables with chairs library (86 blocks), drawn 1:1.
About this block
Square dining table for four with rounded corners, drawn in plan, front and side elevation, the front and side elevations projected from its 3D model with hidden lines removed. It measures 5' 10" wide, 5' 10" deep and 2' 10" high (1.79 m × 1.79 m × 86 cm), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling.
It also comes as a 3D model built from these drawings.
From the Dining tables with chairs library: 86 blocks drawn to one standard, each one available on its own.
In practice
Where it goes
Square tables with rounded corners are what an eat-in kitchen in a family house or a teachers' lounge usually gets, since soft corners are kinder at hip height. On the floor plan, sit it square to the walls with a chair centered on each side; it marks the dining zone as a calm block, without the drama of a diagonal.
Clearances to leave
The block spans 5 ft 10 in (179 cm) on both axes, chairs included, leaving a table of about 36 in (90 cm) square, the smallest comfortable size for four. Give it 36 in (91 cm) from chair back to wall on three sides and 44 in (110 cm) where the kitchen route passes; the rounded corners spare a little at each pass.
Pairs with
A pair of these set end to end in a teachers' lounge makes a long table for eight. In an apartment, it works with the Shallow two-seat sofa with curved back corners, the same soft radius repeated at a different scale across the room.
Common questions
What are the dimensions of this block?
It measures 5' 10" | 1.79 m wide by 5' 10" | 1.79 m deep. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.
Is there a 3D model of this block?
Yes. A 3D model built from this block's drawings, 6' 2" wide, 6' 2" deep and 2' 10" high, is free to download in STEP, DXF 3D, OBJ, GLB, 3MF and STL. It is a closed part, so it also prints at 1:50 or 1:100 for a scale model.
File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.
Details
Collections
Drawing at scale3 views
Seen from above beside a standing person, both at the same scale.
3D model
Built at real size from the plan drawing, as a top on four legs at standard height. Drag to orbit, underneath too; scroll or pinch to zoom.
Dimensions and sizes
Width 5' 10" | 1.79 m, depth 5' 10" | 1.79 m, footprint 34.4 ft², height 2' 10" | 86 cm.
Explore at scale
How big is it?
Footprint 34.4 ft², about 1.8× the floor area of a twin bed.
On your sheet
At 1/2" = 1'-0" the drawing prints 2.93 in × 2.93 in on Letter.
In the room
Plan at real sizeAll 5 checks pass
Dining room layout
Built around the square dining table for four with rounded corners, the block you are viewing.
Checks
- Behind the chairs, left side2' 5"Minimum 17½", recommended 2' 2"
- Behind the chairs, right side3' 11"Minimum 17½", recommended 2' 2"
- Behind the chairs, bottom side3' 2"Minimum 17½", recommended 2' 2"
- Behind the chairs, top side3' 6"Minimum 17½", recommended 2' 2"
- Door swing to the nearest fixture20½"Minimum 2", recommended 4"
Design notes
- Measured from the chair backs: 17½" lets a guest pull a chair out, 2' 2" lets someone walk behind a seated guest.
- From the table edge that is about 3' 0" and 3' 8".
- Allow about 23½" of table edge per person and 15½" of depth for each place setting.
- Hang a pendant 2' 4" to 2' 9" above the table top.
The kit, 3 blocks