Plain mannequin figure with limbs outstretched
Free CAD block from the People seated and standing library (54 blocks), drawn 1:1.
About this block
Plain mannequin figure with limbs outstretched, drawn in plan view. It measures 2' 1" wide and 4' 4" deep (64 cm × 1.31 m), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling.
From the People seated and standing library: 54 blocks drawn to one standard, each one available on its own.
In practice
Where it goes
The plain version of the outstretched figure is for indoor floors: a yoga mat in a studio plan, a bed in a hostel dormitory layout, a treatment table in a physical therapy room or a changing-room bench. Lay it on each bed or mat to check that the furniture outline leaves room for a body with arms spread.
Clearances to leave
At 52 in (131 cm) from hand to hand it sits within a 36 in (90 cm) twin bed only diagonally, so allow 24 in (60 cm) alongside a bed for getting in and 30 in (75 cm) on the open side of a treatment table. Its 25 in (64 cm) width fills a 24 in (60 cm) yoga mat edge to edge.
Pairs with
Use it with the Mannequin figure in swimsuit with limbs outstretched for outdoor loungers on the same project, and with the Mannequin figure with arms and legs splayed for standing stretches. On a dormitory plan lay one on alternate bunks to suggest half occupancy.
Common questions
What are the dimensions of this block?
It measures 2' 1" | 64 cm wide by 4' 4" | 1.31 m deep. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.
How much floor space does it take?
Its footprint is 9.1 ft² (0.84 m²). Leave at least 2' 11" of clear walkway on the sides people use.
File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.
Details
- Width
- 2' 1"64 cm
- Depth
- 4' 4"1.31 m
- Footprint
- 9.1 ft²0.84 m²
- View
- Plan view
- Scale
- 1:1, full size
- 2D formats
- DWG, DXF, SVG, PNGAutoCAD 2013, meters and inches
- Library
- People seated and standing
Collections
Drawing at scalePlan view
Drawn 1:1. Scale bar for reference.
Dimensions and sizes
Width 2' 1" | 64 cm, depth 4' 4" | 1.31 m, footprint 9.1 ft².
Explore at scale
How big is it?
Footprint 9.1 ft², about 0.5× the floor area of a twin bed.
On your sheet
At 1" = 1'-0" the drawing prints 2.11 in × 4.31 in on Letter.
In the room
Plan at real sizeAll 2 checks pass
Galley kitchen layout
Built around the plain mannequin figure with limbs outstretched, the block you are viewing.
Checks
- Work aisle between countertops4' 1"Minimum 3' 6", recommended 4' 0"
- Door swing to the nearest fixture (door moved to fit)4"Minimum 2", recommended 4"
Design notes
- Work aisle 3' 6" for one cook, 4' 0" for two (42 and 48 in).
- Keep sink, cooktop and fridge within a few steps: each leg of the work triangle 3' 11" to 8' 10".
- Leave 15½" of landing countertop beside the cooktop and 23½" beside the sink.
The kit, 3 blocks