Mannequin figure with arms and legs splayed
Free CAD block from the People seated and standing library (54 blocks), drawn 1:1.
About this block
Mannequin figure with arms and legs splayed, drawn in plan view. It measures 21½" wide and 21" deep (55 cm × 54 cm), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling.
From the People seated and standing library: 54 blocks drawn to one standard, each one available on its own.
In practice
Where it goes
Arms and legs splayed in plan gives a star-shaped figure that suits gym floor plans, dance studios, playground layouts and yoga rooms, where each person needs a mat-sized patch of floor. Set it on each mat in a studio plan or on the sprung floor of a gym layout to show spacing between exercisers.
Clearances to leave
The splay takes 21½ by 21 in (55 by 54 cm), but the arms in motion need more, so space studio positions at 60 in (150 cm) centers and keep a 36 in (90 cm) lane along one wall. On a mat of 24 by 71 in (60 by 180 cm) it sits comfortably with room for a fuller stretch.
Pairs with
Use it with the Mannequin figure raising knee, arm across chest in the studio section, and with the Plain mannequin figure with limbs outstretched for the lying-down positions in the same class. A grid of six on a mirrored wall plan sets the class size.
Common questions
What are the dimensions of this block?
It measures 21½" | 55 cm wide by 21" | 54 cm deep. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.
How much floor space does it take?
Its footprint is 3.2 ft² (0.30 m²). Leave at least 2' 11" of clear walkway on the sides people use.
File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.
Details
- Width
- 21½"55 cm
- Depth
- 21"54 cm
- Footprint
- 3.2 ft²0.30 m²
- View
- Plan view
- Scale
- 1:1, full size
- 2D formats
- DWG, DXF, SVG, PNGAutoCAD 2013, meters and inches
- Library
- People seated and standing
Collections
Drawing at scalePlan view
Drawn 1:1. Scale bar for reference.
Dimensions and sizes
Width 21½" | 55 cm, depth 21" | 54 cm, footprint 3.2 ft².
Explore at scale
How big is it?
About 1.8× the height of an A4 sheet, a size that suits detail sheets at 1:5 or 1:10.
On your sheet
At 1" = 1'-0" the drawing prints 1.80 in × 1.77 in on Letter.
In the room
Plan at real sizeAll 2 checks pass
Galley kitchen layout
Built around the mannequin figure with arms and legs splayed, the block you are viewing.
Checks
- Work aisle between countertops4' 1"Minimum 3' 6", recommended 4' 0"
- Door swing to the nearest fixture (door moved to fit)4"Minimum 2", recommended 4"
Design notes
- Work aisle 3' 6" for one cook, 4' 0" for two (42 and 48 in).
- Keep sink, cooktop and fridge within a few steps: each leg of the work triangle 3' 11" to 8' 10".
- Leave 15½" of landing countertop beside the cooktop and 23½" beside the sink.
The kit, 3 blocks