Mannequin figure holding thin rod at its side
Free CAD block from the People seated and standing library (54 blocks), drawn 1:1.
About this block
Mannequin figure holding thin rod at its side, drawn in plan view. It measures 16" wide and 3' 1" deep (41 cm × 94 cm), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling.
From the People seated and standing library: 54 blocks drawn to one standard, each one available on its own.
In practice
Where it goes
A thin rod at the side reads as a cane, a pole, a broom or a cue, so this figure fits a pool hall plan, a hospital ward where a patient uses a cane, a ski lodge layout or a janitor-closet corridor. Place it beside a billiard table on a game-room plan or along a nursing-home corridor.
Clearances to leave
The rod carries the block to 37 in (94 cm) long, so around a billiard table keep 60 in (150 cm) clear on all sides for the cue, and in a nursing-home corridor use 60 in (150 cm) so a cane user and a cart pass. The body itself is only 16 in (40 cm) wide, no more than a plain standing figure.
Pairs with
Pair it with the Broad-shouldered mannequin figure standing, arms at sides for onlookers around a game table, and with the Plain mannequin figure with long diagonal stride for a walker. Two of these with rods angled over a table edge set up a billiards scene.
Common questions
What are the dimensions of this block?
It measures 16" | 41 cm wide by 3' 1" | 94 cm deep. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.
How much floor space does it take?
Its footprint is 4.1 ft² (0.38 m²). Leave at least 2' 11" of clear walkway on the sides people use.
File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.
Details
- Width
- 16"41 cm
- Depth
- 3' 1"94 cm
- Footprint
- 4.1 ft²0.38 m²
- View
- Plan view
- Scale
- 1:1, full size
- 2D formats
- DWG, DXF, SVG, PNGAutoCAD 2013, meters and inches
- Library
- People seated and standing
Collections
Drawing at scalePlan view
Drawn 1:1. Scale bar for reference.
Dimensions and sizes
Width 16" | 41 cm, depth 3' 1" | 94 cm, footprint 4.1 ft².
Explore at scale
How big is it?
Footprint 4.1 ft², about 0.2× the floor area of a twin bed.
On your sheet
At 1" = 1'-0" the drawing prints 1.33 in × 3.07 in on Letter.
In the room
Plan at real sizeAll 2 checks pass
Galley kitchen layout
Built around the mannequin figure holding thin rod at its side, the block you are viewing.
Checks
- Work aisle between countertops4' 1"Minimum 3' 6", recommended 4' 0"
- Door swing to the nearest fixture (door moved to fit)4"Minimum 2", recommended 4"
Design notes
- Work aisle 3' 6" for one cook, 4' 0" for two (42 and 48 in).
- Keep sink, cooktop and fridge within a few steps: each leg of the work triangle 3' 11" to 8' 10".
- Leave 15½" of landing countertop beside the cooktop and 23½" beside the sink.
The kit, 3 blocks