Pyramid chimney range hood
Free CAD block from the Kitchen appliances library (124 blocks), drawn 1:1.
About this block
Pyramid chimney range hood, drawn in plan, front and side elevation, all three projected from its 3D model so they match to the millimeter. It measures 3' 0" wide, 2' 1" high and 20" deep (90 cm × 64 cm × 50 cm), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling. Above the cooktop: 2' 2" over the cooktop, underside at 5' 1".
It also comes as a 3D model built from these drawings.
From the Kitchen appliances library: 124 blocks drawn to one standard, each one available on its own.
In practice
Where it goes
Cooking-wall elevations in houses, apartments and small restaurants are where this tapered canopy belongs. Its 36 in (90 cm) width covers a wide cooktop or a range, and the tapered canopy with a chimney above shows the ducting line to the ceiling. Draw it above the cooktop in elevations and sections; the flat glass canopy block is its plan.
Clearances to leave
Mount the canopy 24–30 in (61–76 cm) above the cooktop, which puts its lower edge near 59–65 in (151–166 cm) off the floor over a 36 in (90 cm) countertop. The 25 in (64 cm) canopy and chimney then reach roughly 7 ft 7 in (2.3 m), so check that against the ceiling before fixing the cabinet line.
Pairs with
Set it over the Freestanding gas range with grates and drawer or the Wide range with tall backguard and six knobs, with wall cabinets either side at the same depth and the chimney in brushed steel.
Common questions
What are the dimensions of this block?
It measures 3' 0" | 90 cm wide by 2' 1" | 64 cm high. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.
Is there a 3D model of this block?
Yes. A 3D model built from this block's drawings, 3' 0" wide, 20" deep and 2' 1" high, is free to download in STEP, DXF 3D, OBJ, GLB, 3MF and STL.
At what height is it installed?
Above the cooktop: 2' 2" over the cooktop, underside at 5' 1". The drawings above show it at that height beside a person, so the clearance reads at a glance.
File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.
Details
- Width
- 3' 0"90 cm
- Height
- 2' 1"64 cm
- Mounting height
- 5' 1" to the undersideAbove the cooktop, 2' 2" over the cooktop, underside at 5' 1"
- Views
- Plan, front and side elevation
- Scale
- 1:1, full size
- 2D formats
- DWG, DXF, SVG, PNGAutoCAD 2013, meters and inches
- 3D formats
- STEP, OBJ, GLB, 3MF, STL
- Library
- Kitchen appliances
Collections
Drawing at scale3 views
Above the cooktop, 2' 2" over the cooktop, underside at 5' 1": drawn 1:1 at its mounting height. Shown beside a 5' 7" (1.69 m) person, both at the same scale.
3D model
Built at real size from the front drawing, in brushed steel: the canopy, the chimney, the filters and the lamps underneath. Drag to orbit, underneath too; scroll or pinch to zoom.
Dimensions and sizes
Width 3' 0" | 90 cm, height 2' 1" | 64 cm, depth 20" | 50 cm, above the cooktop with the underside at 5' 1" | 1.55 m.



Explore at scale
How big is it?
Above the cooktop with its top at 7' 2", which is 126% of an adult's height.
On your sheet
At 1" = 1'-0" the drawing prints 2.97 in × 2.10 in on Letter.
In the room
Elevation at real sizeAll 2 checks pass
Kitchen elevation
Built around the pyramid chimney range hood, the block you are viewing.
Checks
- Countertop2' 11"Recommended 2' 11" to 3' 2"
- Hood above the cooktop2' 4"Recommended 2' 2" to 2' 6"
Design notes
- Countertop at 2' 11"; tall cooks are happier at 3' 1".
- Hood 2' 2" to 2' 6" above a gas cooktop, 21½" to 2' 2" above induction.
- Wall cabinets start 19½" to 23½" above the countertop.
- Leave at least 15½" of countertop on each side of the cooktop.
The kit, 7 blocks
