Seated mannequin figure, knees apart, hands on thighs
Free CAD block from the People seated and standing library (54 blocks), drawn 1:1.
About this block
Seated mannequin figure, knees apart, hands on thighs, drawn in plan view. It measures 21½" wide and 2' 2" deep (55 cm × 65 cm), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling.
From the People seated and standing library: 54 blocks drawn to one standard, each one available on its own.
In practice
Where it goes
Knees apart with hands on the thighs is the broad, relaxed sitter for a bench, a changing-room plan, a bus shelter, a stadium row or a waiting room with bench seating. Put it on the benches of a changing-room plan to count places, or along the seats of a bus-stop layout.
Clearances to leave
The open knees widen the figure to 22 in (55 cm), so bench places should be set at 24–26 in (60–65 cm) rather than squeezed, and the 26 in (65 cm) depth means a bench against a wall needs 36 in (90 cm) of free floor in front for feet and passing. A 18 in (45 cm) bench height suits it.
Pairs with
Seat it beside the Seated mannequin figure with forearms forward, knees apart at a counter, with the Mannequin figure seated with hands resting on thighs in the section. Three on the Three-seat sofa with slim arms and projecting seat fill it edge to edge.
Common questions
What are the dimensions of this block?
It measures 21½" | 55 cm wide by 2' 2" | 65 cm deep. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.
How much floor space does it take?
Its footprint is 3.9 ft² (0.36 m²). Leave at least 2' 11" of clear walkway on the sides people use.
File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.
Details
- Width
- 21½"55 cm
- Depth
- 2' 2"65 cm
- Footprint
- 3.9 ft²0.36 m²
- View
- Plan view
- Scale
- 1:1, full size
- 2D formats
- DWG, DXF, SVG, PNGAutoCAD 2013, meters and inches
- Library
- People seated and standing
Collections
Drawing at scalePlan view
Drawn 1:1. Scale bar for reference.
Dimensions and sizes
Width 21½" | 55 cm, depth 2' 2" | 65 cm, footprint 3.9 ft².
Explore at scale
How big is it?
Footprint 3.9 ft², about 0.2× the floor area of a twin bed.
On your sheet
At 1" = 1'-0" the drawing prints 1.81 in × 2.14 in on Letter.
In the room
Plan at real sizeAll 2 checks pass
Galley kitchen layout
Built around the seated mannequin figure, knees apart, hands on thighs, the block you are viewing.
Checks
- Work aisle between countertops4' 1"Minimum 3' 6", recommended 4' 0"
- Door swing to the nearest fixture (door moved to fit)4"Minimum 2", recommended 4"
Design notes
- Work aisle 3' 6" for one cook, 4' 0" for two (42 and 48 in).
- Keep sink, cooktop and fridge within a few steps: each leg of the work triangle 3' 11" to 8' 10".
- Leave 15½" of landing countertop beside the cooktop and 23½" beside the sink.
The kit, 3 blocks