Two-burner stove with perforated burner heads
Free CAD block from the Ranges and cooktops library (144 blocks), drawn 1:1.
About this block
Two-burner stove with perforated burner heads, drawn in plan, front and side elevation, all three projected from its 3D model so they match to the millimeter. It measures 2' 4" wide, 15½" deep and 4½" high (71 cm × 40 cm × 11 cm), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling.
It also comes as a 3D model built from these drawings.
From the Ranges and cooktops library: 144 blocks drawn to one standard, each one available on its own.
In practice
Where it goes
Draw it into plans of outdoor kitchens, roof terraces, RVs and cabins where a loose stove sits on a counter. Perforated burner heads keep the symbol legible at ½ in = 1 ft (1:20) and ¼ in = 1 ft (1:50), and the 28 in (71 cm) footprint is just wider than a base cabinet. For a front view, borrow the curved-front tabletop stove.
Clearances to leave
Allow 24 in (60 cm) of clear counter on the side where pans come off and keep anything flammable 24–30 in (61–76 cm) above the burners, even outdoors under a pergola. The 15½ in (40 cm) depth fits a 24 in (60 cm) counter with room behind for the propane tank hose to drop away.
Pairs with
Works with the Tabletop two-burner gas stove with curved front as its elevation and the Hot water urn with sight glass and front spigot on a terrace bar, with the counter drawn in sealed hardwood.
Common questions
What are the dimensions of this block?
It measures 2' 4" | 71 cm wide by 15½" | 40 cm deep. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.
Is there a 3D model of this block?
Yes. A 3D model built from this block's drawings, 2' 4" wide, 15½" deep and 4½" high, is free to download in STEP, DXF 3D, OBJ, GLB, 3MF and STL.
File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.
Details
Collections
Drawing at scale3 views
Seen from above beside a standing person, both at the same scale.
3D model
Built at real size from the plan drawing, at its real thickness: the top in pressed steel or black glass, each burner with its crown and cap under cast-iron grates or supports, electric plates or zones where the plan has them, and the knobs. Drag to orbit, underneath too; scroll or pinch to zoom.
Dimensions and sizes
Width 2' 4" | 71 cm, depth 15½" | 40 cm, footprint 3.0 ft², height 4½" | 11 cm.
Explore at scale
How big is it?
Footprint 3.0 ft², about 0.2× the floor area of a twin bed.
On your sheet
At 1" = 1'-0" the drawing prints 2.32 in × 1.31 in on Letter.
In the room
Plan at real sizeAll 3 checks pass
Galley kitchen layout
Built around the two-burner stove with perforated burner heads, the block you are viewing.
Checks
- Aisle in front of the cooktop4' 8"Minimum 3' 3", recommended 3' 6"
- Work aisle between countertops4' 1"Minimum 3' 6", recommended 4' 0"
- Door swing to the nearest fixture (door moved to fit)4"Minimum 2", recommended 4"
Design notes
- Work aisle 3' 6" for one cook, 4' 0" for two (42 and 48 in).
- Keep sink, cooktop and fridge within a few steps: each leg of the work triangle 3' 11" to 8' 10".
- Leave 15½" of landing countertop beside the cooktop and 23½" beside the sink.
The kit, 3 blocks