Tabletop two-burner gas stove with curved front
Free CAD block from the Ranges and cooktops library (144 blocks), drawn 1:1.
About this block
Tabletop two-burner gas stove with curved front, drawn in plan, front and side elevation. It measures 2' 3" wide, 4½" high and 15½" deep (69 cm × 12 cm × 40 cm), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling. On the countertop: countertop at 2' 11".
It also comes as a 3D model built from these drawings.
From the Ranges and cooktops library: 144 blocks drawn to one standard, each one available on its own.
In practice
Where it goes
Small apartments, student rooms, vacation rentals and jobsite cafeterias often have the stove sitting loose on a countertop. Place it on the countertop line of the cooking-wall elevation, curved front to the viewer; the 4½ in (12 cm) body reads as a low band below the backsplash. The plan with the center plate shows the same stove from above.
Clearances to leave
Leave 24 in (60 cm) of spare countertop on one side for pans, and keep the hood underside 24–30 in (61–76 cm) above the burners. Because the body stands 4½ in (12 cm) above the countertop, pan rims land higher than with a built-in cooktop, so check that wall cabinets at 55 in (140 cm) still clear a tall pot.
Pairs with
Set it beside the Rounded double-bowl sink with swivel faucet, hang the Wall rail with four hanging cooking utensils above the backsplash, and finish the elevation with the Pyramid chimney range hood overhead in stainless steel.
Common questions
What are the dimensions of this block?
It measures 2' 3" | 69 cm wide by 4½" | 12 cm high. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.
Is there a 3D model of this block?
Yes. A 3D model built from this block's drawings, 2' 3" wide, 15½" deep and 4½" high, is free to download in STEP, DXF 3D, OBJ, GLB, 3MF and STL.
At what height is it installed?
On the countertop: countertop at 2' 11". The drawings above show it at that height beside a person, so the clearance reads at a glance.
File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.
Details
Collections
Drawing at scale3 views
On the countertop, countertop at 2' 11": drawn 1:1 at its mounting height. Shown beside a 5' 7" (1.69 m) person, both at the same scale.
3D model
Tabletop two-burner gas stove with center plate. Built at real size from the plan drawing, at its real thickness: the top in pressed steel or black glass, each burner with its crown and cap under cast-iron grates or supports, electric plates or zones where the plan has them, and the knobs. Drag to orbit, underneath too; scroll or pinch to zoom.
Dimensions and sizes
Width 2' 3" | 69 cm, height 4½" | 12 cm, depth 15½" | 40 cm, on the countertop with the underside at 2' 11" | 90 cm.
Explore at scale
How big is it?
On the countertop with its top at 3' 4", which is 58% of an adult's height.
On your sheet
At 1" = 1'-0" the drawing prints 2.25 in × 0.38 in on Letter.
In the room
Elevation at real sizeAll 2 checks pass
Kitchen elevation
Built around the tabletop two-burner gas stove with curved front, the block you are viewing.
Checks
- Countertop2' 11"Recommended 2' 11" to 3' 2"
- Hood above the cooktop2' 4"Recommended 2' 2" to 2' 6"
Design notes
- Countertop at 2' 11"; tall cooks are happier at 3' 1".
- Hood 2' 2" to 2' 6" above a gas cooktop, 21½" to 2' 2" above induction.
- Wall cabinets start 19½" to 23½" above the countertop.
- Leave at least 15½" of countertop on each side of the cooktop.
The kit, 7 blocks