Built-in oven with display and three knobs
Free CAD block from the Ranges and cooktops library (144 blocks), drawn 1:1.
About this block
Built-in oven with display and three knobs, drawn in plan, front and side elevation, all three projected from its 3D model so they match to the millimeter. It measures 22" wide, 23" high and 2' 0" deep (56 cm × 59 cm × 62 cm), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling. Under the countertop: top under a countertop at 2' 11".
It also comes as a 3D model built from these drawings.
From the Ranges and cooktops library: 144 blocks drawn to one standard, each one available on its own.
In practice
Where it goes
A standard built-in oven front for interior elevations of apartment and house kitchens, with a display between three knobs along the face. At 22 in (56 cm) by 23 in (58 cm) it is the usual size for a 24 in (60 cm) cabinet. Place it under the cooktop in the cooking-wall elevation, in a tall cabinet at eye level, or in ½ in = 1 ft (1:20) kitchen sections.
Clearances to leave
The 23 in (58 cm) height suits an under-counter cabinet with the top at 36 in (90 cm), or an eye-level position with the oven base at 32 in (80 cm) so a tray can be lifted out without stooping. Keep 42–48 in (107–122 cm) clear in front for the drop-down door and a 24 in (60 cm) landing counter nearby.
Pairs with
Pair it with the Four-burner gas cooktop with split grates and side knobs on the plan and the Built-in appliance with two drawers and bottom controls beneath it as a warming drawer, in a stainless-steel finish.
Common questions
What are the dimensions of this block?
It measures 22" | 56 cm wide by 23" | 59 cm high. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.
Is there a 3D model of this block?
Yes. A 3D model built from this block's drawings, 22" wide, 2' 0" deep and 23" high, is free to download in STEP, DXF 3D, OBJ, GLB, 3MF and STL. It is a closed part, so it also prints at 1:50 or 1:100 for a scale model.
At what height is it installed?
Under the countertop: top under a countertop at 2' 11". The drawings above show it at that height beside a person, so the clearance reads at a glance.
File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.
Details
Collections
Drawing at scale3 views
Under the countertop, top under a countertop at 2' 11": drawn 1:1 at its mounting height. Shown beside a 5' 9" (1.75 m) person, both at the same scale.
3D model
Built at real size from the front drawing, as a built-in oven: the carcass that goes into the cabinet, a steel control panel with knobs and display, and a black glass door with its window and bar handle. Drag to orbit, underneath too; scroll or pinch to zoom.
Dimensions and sizes
Width 22" | 56 cm, height 23" | 59 cm, depth 2' 0" | 62 cm, under the countertop with the underside at 11" | 29 cm.
Explore at scale
How big is it?
Under the countertop with its top at 2' 10", which is 50% of an adult's height.
On your sheet
At 1" = 1'-0" the drawing prints 1.85 in × 1.92 in on Letter.
In the room
Elevation at real sizeAll 2 checks pass
Kitchen elevation
Built around the built-in oven with display and three knobs, the block you are viewing.
Checks
- Countertop2' 11"Recommended 2' 11" to 3' 2"
- Hood above the cooktop2' 4"Recommended 2' 2" to 2' 6"
Design notes
- Countertop at 2' 11"; tall cooks are happier at 3' 1".
- Hood 2' 2" to 2' 6" above a gas cooktop, 21½" to 2' 2" above induction.
- Wall cabinets start 19½" to 23½" above the countertop.
- Leave at least 15½" of countertop on each side of the cooktop.
The kit, 7 blocks