Narrow freestanding range with lid and drawer
Free CAD block from the Ranges and cooktops library (144 blocks), drawn 1:1.
About this block
Narrow freestanding range with lid and drawer, drawn in plan, front and side elevation, all three projected from its 3D model so they match to the millimeter. It measures 20" wide, 3' 7" high and 2' 1" deep (51 cm × 1.08 m × 65 cm), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling.
It also comes as a 3D model built from these drawings.
From the Ranges and cooktops library: 144 blocks drawn to one standard, each one available on its own.
In practice
Where it goes
A narrow freestanding range for studio apartments, hostels, RVs and public-housing apartments, drawn in elevation with its hinged lid up and a storage drawer below. At 20 in (51 cm) wide it slots into gaps a 24 in (60 cm) range cannot. Place it in interior elevations and sections of small kitchens, and in renovation surveys of existing buildings.
Clearances to leave
Because the lid folds up, the 43 in (108 cm) overall height includes the raised lid; the cooktop surface sits lower, near the 36 in (90 cm) countertop line. Keep 24 in (60 cm) of counter on one side if possible, allow 42–48 in (107–122 cm) in front for the oven door and drawer, and leave a small gap each side.
Pairs with
Pairs with the Compact microwave with two dials on a wall bracket above and the Scrolled dish rack with plates and cups by the sink, with the floor in sheet vinyl and the range in white enamel.
Common questions
What are the dimensions of this block?
It measures 20" | 51 cm wide by 3' 7" | 1.08 m high. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.
Is there a 3D model of this block?
Yes. A 3D model built from this block's drawings, 20" wide, 2' 1" deep and 3' 7" high, is free to download in STEP, DXF 3D, OBJ, GLB, 3MF and STL.
File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.
Details
Collections
Drawing at scale3 views
Shown beside a 5' 7" (1.69 m) person, both at the same scale.
3D model
Built at real size from the front drawing, as a freestanding range: plinth or feet, an oven with a black glass door, its window and bar handle, a steel control panel with knobs, and the cooktop with burners under cast-iron grates. Drag to orbit, underneath too; scroll or pinch to zoom.
Dimensions and sizes
Width 20" | 51 cm, height 3' 7" | 1.08 m, depth 2' 1" | 65 cm.
Explore at scale
How big is it?
At 3' 7" high it reaches 62% of an adult's height and 52% of a door.
On your sheet
At 1" = 1'-0" the drawing prints 1.67 in × 3.54 in on Letter.
In the room
Elevation at real sizeAll 2 checks pass
Kitchen elevation
Built around the narrow freestanding range with lid and drawer, the block you are viewing.
Checks
- Countertop2' 11"Recommended 2' 11" to 3' 2"
- Hood above the cooktop2' 4"Recommended 2' 2" to 2' 6"
Design notes
- Countertop at 2' 11"; tall cooks are happier at 3' 1".
- Hood 2' 2" to 2' 6" above a gas cooktop, 21½" to 2' 2" above induction.
- Wall cabinets start 19½" to 23½" above the countertop.
- Leave at least 15½" of countertop on each side of the cooktop.
The kit, 7 blocks