Seated mannequin figure, elbows spread, hands behind head
Free CAD block from the People seated and standing library (54 blocks), drawn 1:1.
About this block
Seated mannequin figure, elbows spread, hands behind head, drawn in plan view. It measures 2' 6" wide and 20" deep (77 cm × 51 cm), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling.
From the People seated and standing library: 54 blocks drawn to one standard, each one available on its own.
In practice
Where it goes
Elbows spread with hands behind the head in plan is a person leaning back in an office chair, a movie theater seat or a lounge armchair, so it goes on office plans, home theater layouts, a staff room and a departure lounge. Place it at a manager's desk or in the back row of a movie theater plan.
Clearances to leave
The spread elbows reach 30 in (77 cm) across, so an office chair needs 32 in (80 cm) of frontage and a seat with arms should be 33 in (85 cm) wide outside to outside; the 20 in (51 cm) depth sits within a 24 in (60 cm) chair. Behind it, 40 in (100 cm) lets the chair tilt back.
Pairs with
Match it with the Mannequin figure seated with hands behind head in the section, and seat it in the Rounded armchair with stitched seams or on the Two-seat sofa with plump arms and throw pillow. One of these among plain sitters shows who is in charge.
Common questions
What are the dimensions of this block?
It measures 2' 6" | 77 cm wide by 20" | 51 cm deep. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.
How much floor space does it take?
Its footprint is 4.2 ft² (0.39 m²). Leave at least 2' 11" of clear walkway on the sides people use.
File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.
Details
- Width
- 2' 6"77 cm
- Depth
- 20"51 cm
- Footprint
- 4.2 ft²0.39 m²
- View
- Plan view
- Scale
- 1:1, full size
- 2D formats
- DWG, DXF, SVG, PNGAutoCAD 2013, meters and inches
- Library
- People seated and standing
Collections
Drawing at scalePlan view
Drawn 1:1. Scale bar for reference.
Dimensions and sizes
Width 2' 6" | 77 cm, depth 20" | 51 cm, footprint 4.2 ft².
Explore at scale
How big is it?
Footprint 4.2 ft², about 0.2× the floor area of a twin bed.
On your sheet
At 1" = 1'-0" the drawing prints 2.53 in × 1.67 in on Letter.
In the room
Plan at real sizeAll 2 checks pass
Galley kitchen layout
Built around the seated mannequin figure, elbows spread, hands behind head, the block you are viewing.
Checks
- Work aisle between countertops4' 1"Minimum 3' 6", recommended 4' 0"
- Door swing to the nearest fixture (door moved to fit)4"Minimum 2", recommended 4"
Design notes
- Work aisle 3' 6" for one cook, 4' 0" for two (42 and 48 in).
- Keep sink, cooktop and fridge within a few steps: each leg of the work triangle 3' 11" to 8' 10".
- Leave 15½" of landing countertop beside the cooktop and 23½" beside the sink.
The kit, 3 blocks