Seated mannequin figure with legs extended and crossed
Free CAD block from the People seated and standing library (54 blocks), drawn 1:1.
About this block
Seated mannequin figure with legs extended and crossed, drawn in plan view. It measures 2' 6" wide and 4' 2" deep (77 cm × 1.26 m), and it is drawn 1:1, full size, so it drops into any drawing set up in meters or in inches without rescaling.
From the People seated and standing library: 54 blocks drawn to one standard, each one available on its own.
In practice
Where it goes
Legs extended and crossed at the ankle in plan is a figure on a recliner, a deck chair, a hammock chair or a bed used as a seat, so it goes on hotel room plans, terrace layouts, pool decks and a student room plan. Draw it on the chaise in a hotel suite plan or on a deck chair on a terrace layout.
Clearances to leave
With legs out the figure runs 50 in (126 cm), so a chaise of 63 in (160 cm) holds it fully and the walkway in front needs 36 in (90 cm) beyond the feet. At 30 in (77 cm) wide the crossed legs spill over a 24 in (60 cm) deck chair, which is worth showing on a tight balcony plan.
Pairs with
Lay it on the Chaise longue with stitched rounded arms or the Narrow chaise longue with partial side backrest, and draw the Man in suit with crossed legs, hand to chin in the section. Two side by side on a balcony set the deck chair spacing.
Common questions
What are the dimensions of this block?
It measures 2' 6" | 77 cm wide by 4' 2" | 1.26 m deep. The drawing is 1:1, full size, so it inserts at the right size in metric and in imperial drawings.
How much floor space does it take?
Its footprint is 10.5 ft² (0.98 m²). Leave at least 2' 11" of clear walkway on the sides people use.
File formats, AutoCAD versions and units are explained on the formats page; every file is free for personal and commercial work under the license.
Details
- Width
- 2' 6"77 cm
- Depth
- 4' 2"1.26 m
- Footprint
- 10.5 ft²0.98 m²
- View
- Plan view
- Scale
- 1:1, full size
- 2D formats
- DWG, DXF, SVG, PNGAutoCAD 2013, meters and inches
- Library
- People seated and standing
Collections
Drawing at scalePlan view
Drawn 1:1. Scale bar for reference.
Dimensions and sizes
Width 2' 6" | 77 cm, depth 4' 2" | 1.26 m, footprint 10.5 ft².
Explore at scale
How big is it?
Footprint 10.5 ft², about 0.5× the floor area of a twin bed.
On your sheet
At 1" = 1'-0" the drawing prints 2.54 in × 4.15 in on Letter.
In the room
Plan at real sizeAll 2 checks pass
Galley kitchen layout
Built around the seated mannequin figure with legs extended and crossed, the block you are viewing.
Checks
- Work aisle between countertops4' 1"Minimum 3' 6", recommended 4' 0"
- Door swing to the nearest fixture (door moved to fit)4"Minimum 2", recommended 4"
Design notes
- Work aisle 3' 6" for one cook, 4' 0" for two (42 and 48 in).
- Keep sink, cooktop and fridge within a few steps: each leg of the work triangle 3' 11" to 8' 10".
- Leave 15½" of landing countertop beside the cooktop and 23½" beside the sink.
The kit, 3 blocks